PKE Meter Main Board – MSHDesignSTUDIO Version


4 in stock

Category: Tag:


This is the main board that fits inside the PKE Meter shell from MSHDesignStudios.

It requires the following parts:

  • Two 74HC595 Shift Registers
  • Arduino Nano
  • DFplayer w/ SD Card
  • Two 1k Ohm Resistors
  • One 1N4001 Rectifier Diode
  • Optional 470uf Capacitor – 10V

Note that this PKE Meter board runs on custom code and NOT the code that was included with your MSHDesignStudio purchase.

Additional information

Weight 0.59 oz
Dimensions 6 × 4 × 0.25 in